How to connect ClonerAlliance ViewPro to the third-party live streaming software?

You can use ClonerAlliance Helper together with ClonerAlliance ViewPro to preview/record/livestream videos, or you can also use OBS Studio, which is a popular open source software for video recording and live streaming.

Connection Guide of ClonerAlliance ViewPro

  1. Connect the video player to IN port on ClonerAlliance ViewPro via an HDMI cable. Note: For AV/VGA/YPbPr source devices, please use the included MMI cable and connect it to the MMI port on ViewPro. After connections, please use the signal buttons on the remote or the “Source” button on ViewPro device to select the correct input signal.

  2. Connect the USB-A to Micro-B cable between the “To PC” port and the USB port of PC.

  3. Plug the power adapter into the power socket and plug the other end into the 12V port of ClonerAlliance ViewPro. Or install batteries into the device for power supply.

Install ClonerAlliance Helper or OBS Studio

For Windows users, ClonerAlliance Helper or third-party software like OBS, VLC, etc can be used with ClonerAlliance ViewPro. Please be awared that ClonerAlliance ViewPro doesn’t support Linux or Mac for now. You may make a selection according to your own demand.

Setting for live stream in ClonerAlliance Helper (Windows)

  1. Run ClonerAlliance Helper software.

  2. Please click “Setup” button to set up live stream server:

Then click ”Add” to confirm settings and add a live stream server.

  1. Please click “Start Live” to start live streaming.

  2. At the same time, you also can click “Record(F2)” to capture the streaming videos.

Setting for preview video in OBS studio

  1. Run Open Broadcaster Software (OBS Studio). You may download OBS at:

  2. Please click “+” below “Sources” and select “Video Capture Device” from the pop-up menu, then click “OK”.

  3. In the “Properties for Video Capture Device” window, select “Video Streaming” in the dropdown list of“Device”, and then scroll down to the “Audio Output Mode” option. Please select “Output desktop audio (DirectSound)” in the drop-down list. Click “OK” to save the settings.

  4. Now you can preview the video.

Note: Please do NOT run ClonerAlliance Helper and any Third-Party Live Streaming Software like OBS Studio at the same time. You need to run each of them separately.