How to record videos with HDML-Cloner Wand?

System requirements

Prior to installing HDML-Cloner Wand Helper, please make sure you are using Windows Vista or later versions and your PC is equipped with USB 2.0 or USB 3.0 port.

Install HDML-Cloner Wand Helper

There are two methods to obtain HDML-Cloner Wand Helper. One is to install it from the installation CD, while the other is to download from https://www.cloner-alliance.com/download.html

If you install HDML-Cloner Wand Helper from the installation CD, please insert it into the PC drive. Click “Install Driver & Application Software” and the setup wizard window will pop up. Click Next-Next-Next-Next-Next-Install-Yes, restart the computer now-Finish.

If the following window appears during the installation process, please select “Install”, otherwise HDML-Cloner Wand Helper will not work properly.

https://s1.occld.com/image/ca/kb/wand_driver.jpg

Note: Please don’t connect HDML-Cloner Wand to PC before installing the software, or there will be a prompt “USB Device Not Recognized”.

Connect

  1. Plug the USB cable on HDML-Cloner Wand into the USB port of PC.

  2. Plug the mini connector end to the HDMI port of HDML-Cloner Wand.

  3. Connect an HDMI cable between the HDMI to mini-HDMI connector and video player.

Note: Please connect devices strictly in the order of 1-2-3, otherwise the problem “USB Device Not Recognized” may occur.

https://s1.occld.com/image/ca/kb/wand_connection_pc.jpg

After installing HDML-Cloner Wand Helper and HDML-Cloner Wand device has been connected to the USB port of PC, the system will prompt “Found a new hardware” and install the driver automatically. Please make sure “ClonerAlliance HCW-998W Device” appears in the Device Manager (Right click on My Computer – Manage – System Tools – Device Manager). If “ClonerAlliance HCW-998W Device” is not in the list, please reinstall HDML-Cloner Wand Helper and try again.

https://s1.occld.com/image/ca/kb/wand_install_driver_success.jpg

Register HDML-Cloner Wand Helper

Run HDML-Cloner Wand Helper. Click “i” button on the main interface to open the “About” window. Then click on the “Register” button to open the “Register” window.

https://s1.occld.com/image/ca/kb/wand_register_window.jpg

Fill in your proper Email address, real name and code. The registration code can be found on the back of HDML-Cloner Wand. Then click on “OK” to finish the registration.

Record/Capture

After HDML-Cloner Wand Helper installed and HDML-Cloner Wand connected properly, run HDML-Cloner Wand Helper.

https://s1.occld.com/image/ca/kb/wand_main_window.jpg

Click on the “Record” button to start recording. Or press the hotkey according to the interface prompt to start recording.

https://s1.occld.com/image/ca/kb/wand_recording.jpg

Click on the “Stop” button to stop recording. Click on “Folder” button to open the “Videos & Images” window in which the recorded videos are displayed. You can click on “Play” button to play the output video directly.

image0


Updated : Nov 21, 2019.