How to record videos to PC with ClonerAlliance Box Pro?

1. System Requirements

Prior to installing HDML-Cloner Pro Helper, please make sure you are using Windows Vista or later versions and your PC is equipped with USB 2.0 or USB 3.0 port.

2. Install HDML-Cloner Pro Helper

HDML-Cloner Pro Helper is a smart program to record video discs, game videos, homemade videos or anything from any video source under Windows OS working together with ClonerAlliance Box Pro.

Please download the latest version of HDML-Cloner Pro Helper from our official website: https://www.cloner-alliance.com/download.html

If the following window appears during the installation process, please select “Install”, otherwise HDML-Cloner Pro Helper will not work properly.

https://s1.occld.com/image/ca/kb/evolve_install_driver.jpg

Note: Please don’t connect ClonerAlliance Box Pro to PC before installing the software, or there will be a prompt “Unknown USB Device”.

  1. Connect

  1. Connect the video player to IN port on ClonerAlliance Box Pro via an HDMI cable.

  2. Connect the Micro-USB to USB cable between the “TO PC” port of ClonerAlliance Box Pro and the USB port of PC.

  3. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of ClonerAlliance Box Pro.

Tips:

  1. If you want to connect devices via the VGA/AV/YPbPr to HDMI cable, please connect the video player to MMI IN port on ClonerAlliance Box Pro.

  2. When ClonerAlliance Box Pro is connected to PC successfully, the LED light will turn off.

https://s1.occld.com/image/ca/kb/pro_connection_pc.jpg

After all devices are connected properly, when you power on all devices, the Windows operating system will prompt “Found a new hardware” and install the driver automatically. Wait a while and when the prompt “Device driver software installed successfully” pops up (as shown below), run HDML-Cloner Pro Helper on the desktop.

https://s1.occld.com/image/ca/kb/evolve_install_driver_success.jpg
  1. Register HDML-Cloner Pro Helper

For more details about registering HDML-Cloner Pro Helper, click HERE to read step by step instructions.

  1. Record/Capture

  1. Run HDML-Cloner Pro Helper on your PC and play the video.

  2. Click evolve_record_button to start recording.

https://s1.occld.com/image/ca/kb/evolve_recording.jpg
  1. Click evolve_stop_button to stop recording.

Tips: During recording, you can click evolve_pause_button to pause at anytime. When you want to resume, please click evolve_resume_button to continue recording. Besides, you can click evolve_capture_button to take screenshots or click capturegif to capture a GIF picture.

https://s1.occld.com/image/ca/kb/evolve_paused.jpg
  1. After recording, click evolve_locate_button to view the recorded video. Then you can click evolve_play_button to play back the recorded video directly.

image0


Updated : Jun 24, 2020.